Inovance NICE900 Series - General Specifications; NICE900 Models

Chapter 2 Product Information
- 13 -
2.3 NICE900 Models
Table 2-1 NICE900 models
Model Input Voltage
Power
Capacity
(kVA)
Input Current
(A)
Output
Current
(A)
Adaptable
Motor
(W)
NICE-D-A-S0P2
Single-phase 220 V
(-15% to 20%)
0.5 2.7 1.3 200
NICE-D-A-S0P4 1.0 5.4 2.3 400
NICE-D-A-S0P7 1.5 8.2 4.0 750
2.4 General Specications
Item Specications
Basic
specications
Maximum
output
frequency
99.00 Hz
Speed range
1:50 (SVC)
1:1000 (CLVC)
SVC: sensorless vector control
CLVC: closed-loop vector control
Speed stability
±0.5% (SVC)
±0.05% (CLVC)
Startup torque
1 Hz/150% (SVC)
0 Hz/180% (CLVC)
Frequency
resolution
0.01 Hz
Current
resolution
0.01 A
Carrier
frequency
2–16 kHz
Major functions
Two auto-tuning modes are supported, with-load auto-tuning and
no-load auto-tuning.
For CLVC on the AC PMSM using a common ABZ encoder, open-
collector output or push-pull output is supported.
For SVC, functions such as xed torque boost, customized torque
boost and over-excitation are supported.
Door width auto-tuning is supported.
Automatic demonstration is supported.
Automatic identication upon hindering is supported.
Protection functions
Controller overload protection (1 minute for 150% of rated current
, 1 second for 180% of rated current) is supported.
Protections on overvoltage, undervoltage, overcurrent, output
phase loss and inter-phase short circuit are supported.