What to do if INSIGHT CS 2 unit will not power on?
If your INSIGHT Monitor won't power on after starting your vehicle or pressing the screen/buttons, it's typically due to a blown OBDii/Cigarette Lighter Fuse. Replace the fuse and test the unit again.
Why is my INSIGHT CS 2 Monitor camera picture frozen?
If the camera picture on your INSIGHT Monitor is frozen, the cause may be bad connections. Double-check your fuse and connections to resolve this issue.
What to do if INSIGHT CS 2 display beeps quickly?
If your INSIGHT Monitor display beeps quickly, it might indicate a device malfunction. Update the device using Fusion software to resolve this issue.
Why does INSIGHT CS 2 Monitor display beep for two seconds?
If the INSIGHT Monitor display beeps for two seconds, it means the unit is too hot due to direct sunlight. Once the unit has cooled down, the display will turn on.
What to do if INSIGHT CS 2 has no display when the key is on?
If there is no display on your INSIGHT Monitor when the key is in the 'on' position, it may be because the screen hasn't been activated yet. Touch the screen or start the vehicle to activate it.
Explains the meaning of WARNING and CAUTION messages in the manual.
Outlines rules for safe operation and potential risks of the product.
Guides users through downloading the necessary software for device updates.
Explains the process of updating the device using the Fusion software.
Details how to connect the device to the vehicle using the provided cables.
Explains how to securely attach the device to the windshield.
Provides instructions for physically mounting the display unit.
Guides users to select the correct vehicle manufacturer for proper device configuration.
Guides users on how to customize individual gauges displayed on the screen.
Allows calibration of MPH by inputting vehicle tire size specifications.
Guides users on configuring audible and visual alerts for various vehicle parameters.
Explains how to retrieve Diagnostic Trouble Codes (DTCs) from the vehicle.
Guides on how to erase Diagnostic Trouble Codes from the vehicle's system.
Details the process for manually initiating Diesel Particulate Filter regeneration.
Provides solutions for common symptoms and issues encountered with the device.
General| Display Size | 27 inches |
|---|---|
| Resolution | 2560 x 1440 (QHD) |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Screen Size | 27 inches |
| Panel Type | IPS |
| VESA Mount | 100 x 100 mm |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Gamut | sRGB 99% |
| Ports | HDMI, DisplayPort |
To Next Page