36
The data logging feature allows you to record all of the available
PID data on your display. This information can be retrieved and
viewed using the MyStyle software package.
NOTE: The display also runs background tasks which are also recorded.
This information can be ignored.
Data Logging
NOTE: The maximum amount of Data Logging time depends on how many
items you are logging at once. This may be anywhere from 15 to 20 minutes
total. Once the limit is reached, the Data Logging feature will be automatically
shut off.
NOTE: If you turn the same Data Run back On, the previous data will be
erased and a new recording session will begin. If the indicator light is red,
there is currently a recorded le associated with that run.
STEP 1 -PresstheHome
button to enter the Main
Menu.
STEP 2 - Use the Up/Down
arrow buttons to scroll
down to the Data Logging
option. Press Enter.
STEP 3 - Select one of the (5)
Data Run options. This will
turn the run On or Off.
NOTE: Only one run can be
turned on at a time.
STEP 4 - SelecttheHomebuttontoreturntothemaingauge
screen. The display is now in recording mode.
STEP 5 -Onceyouhaverecordedforaspecicamountoftime,
return to the Data Logging menu and turn Off the run.
Main Menu
Screen Layout
Records
Data Logging
Performance Testing
Diagnostics
Settings
Data Logging
Data Run 1: Off
Data Run 2: Off
Data Run 3: Off
Data Run 4: Off
Data Run 5: Off
Data Logging Explained
Data Logging
To Next Page
Loading...
General