How to resolve audio noise on Insignia LED TV?
To resolve audio noise on your Insignia LED TV, other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. Once you have determined which device is causing interference, move it further from the TV to eliminate the interference.
How to fix unstable network connection on Insignia NS-42E859A11?
To fix an unstable network connection on your Insignia LED TV: * Unplug the Ethernet cables, then plug them back in. * Move your wireless access point closer to your TV.
What causes a 'ghost' or double image on Insignia LED TV?
A 'ghost' or double image on your Insignia LED TV may be caused by obstructions, such as high-rise buildings or hills, preventing your antenna from receiving a clear signal. Using a highly directional antenna may improve the picture quality.
Why is there no output from one of the speakers on my Insignia NS-42E859A11 LED TV?
If there's no output from one of the speakers on your Insignia LED TV: * Adjust the balance of the speakers. * Make sure that the audio cables are connected correctly and securely to the back of your TV.
How to resolve snowy picture or noise on Insignia NS-42E859A11 LED TV?
To resolve a snowy picture or noise on your Insignia LED TV, ensure that the AV and antenna cables are connected securely.
What to do if manual network setup fails on Insignia NS-42E859A11 LED TV?
If manual network setup fails on your Insignia LED TV, make sure you enter correct IP address.
General| Display diagonal | 42 \ |
|---|---|
| Display brightness | 450 cd/m² |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 12000:1 |
| Screen format adjustments | 16:9 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| 3D | No |
| Backlight | - |
| Headphone connectivity | 3.5 mm |
| HDMI ports quantity | 4 |
| DVI-D ports quantity | 1 |
| DVI-I ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible memory cards | Not supported |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| RMS rated power | - W |
| Number of speakers | 3 |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 115 W |
| Remote control type | Standard |
Weight and Dimensions| Depth (with stand) | 279.4000 mm |
|---|---|
| Weight (with stand) | 17780.8209 g |
| Depth (without stand) | 50.8000 mm |
| Width (without stand) | 990.6000 mm |
| Height (without stand) | 609.6000 mm |
| Weight (without stand) | 14605.6743 g |
Tips for safe usage and placement of flat panel displays to prevent injury.
Detailed safety guidelines and warnings for operating and maintaining the TV.
Important cautions regarding power lines, LCD panel, service, and outdoor antenna grounding.
Steps for connecting various external devices and power to the TV.
Steps for initial TV setup using the Setup Wizard.
How to customize picture settings for optimal viewing experience.
Options for manually adjusting sound levels and audio features.
Configuring wired or wireless network connections for internet access.
Step-by-step guide to configure the TV as the primary hub for the Rocketboost network.
Solutions for issues like no power, no picture, audio problems, and remote control failures.
Guide to reset the TV to its original factory settings and re-run setup.
Instructions for adding the remote to the Z-Wave network and toggling between IR/RF modes.
To Next Page
