Insignia NS-42E859A11 User Manual

www.insigniaproducts.com
27
NS-32E859A11/NS-42E859A11 Getting Started
Wired connection
Depending on how your Internet connection is setup, you can
connect your TV to:
•An Internet jack
•A modem
•A router
To connect your TV to your home network:
• Connect an Ethernet cable (not provided) to the ETHERNET
jack on the back of your TV and to your home network.
For step-by-step instructions to set up a wired Internet
connection, see “Configuring a wired connection” on page 86.
Turning on your TV for the
first time
The first time you turn on your TV, the Setup Wizard opens. The
Setup Wizard guides you through setting up basic settings. You
can skip these settings or press EXIT, MENU, TiVo, or LIVE on
your remote control to exit the wizard (except when a software
update is in progress).
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See page 17 for
details).
• Connected an antenna, cable TV, or satellite TV. (See
page 18 for details.)
• Connected to your home network, if available. (See
page 26 for details).
• Connected the power cord. (See page 17 for details.)
2 Press (power) to turn on your TV.
3 The Welcome screen opens. Press S or T to highlight Set up
this TV (typical), then press SELECT.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
ANT/CABLE IN ETHERNET
COMPONENTAVIN
SPDIF
Y/Video L R
Back of TV
OR
Internet jack Modem Router
Note
If you are setting up your TV for in-store display,
highlight Set up in retail mode, then press SELECT.
The Retail Mode Energy Usage screen opens. Highlight
Continue with retail mode, then press SELECT. The
Retail Mode Activated screen opens. Press SELECT to
select Continue.
Welcome
You are about to begin Guided Setup,which prepares the Insignia HD
TV for your use. This typically takes less than 45 minutes.
(If you skip Guided Setup now, you can set it up later by pressing TIVO
and choosing Settings > Help > Reset this TV > Repeat Guided
Setup.)
Set up this TV(typical)
Set up in retail mode
Skip for now

Insignia NS-42E859A11 Specifications

General

Display diagonal	42 \
Display brightness	450 cd/m²
Supported video modes	1080p
Contrast ratio (dynamic)	12000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Backlight	-
Headphone connectivity	3.5 mm
HDMI ports quantity	4
DVI-D ports quantity	1
DVI-I ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	Not supported
Product color	Black
Panel mounting interface	200 x 200 mm
RMS rated power	- W
Number of speakers	3
Power consumption (standby)	1 W
Power consumption (typical)	115 W
Remote control type	Standard

Weight and Dimensions

Depth (with stand)	279.4000 mm
Weight (with stand)	17780.8209 g
Depth (without stand)	50.8000 mm
Width (without stand)	990.6000 mm
Height (without stand)	609.6000 mm
Weight (without stand)	14605.6743 g