Insignia NS-42E859A11 User Manual

www.insigniaproducts.com
65
NS-32E859A11/NS-42E859A11 Using Your TV
Using Audio Return Channel (ARC)
The Audio Return Channel feature sends the TV audio signal to
the A/V receiver or amplifier through the HDMI cable. You do
not need to connect a cable from the audio output of your TV
to the audio input of the A/V receiver or amplifier.
To use Audio Return Channel:
1 Connect an ARC-enabled device to the HDMI 1 ARC jack on
the side of your TV, and make sure that the ARC feature on
the connected device is turned on.
2 Press TiVo. The Home screen opens. Press S or T to select
Settings, then press
X or SELECT.
3 Press S or T to highlight Settings, then press X or SELECT.
4 Press S or T to highlight Audio, then press X or SELECT.
5 Press S or T to highlight Audio return channel (ARC), then
press
X or SELECT.
10:00pm
Home
Settings
Connect to the Internet
Settings
Parental Controls
Check for updates
Account & system info
Help
Sleep timer
10:00 PM
Settings
Channels & providers
Devices
Network
Recommendations
Video
Appearance
Sound effects volume
Alternate audio
Dolby Digital
Audyssey Dynamic Volume™
SRS TruSurround HD™
Rocketboost™ settings
Manually adjust audio
Audio only (no video)
TV speakers
Audio return channel (ARC)
Audio
10:00pm
Settings
Audyssey Dynamic Volume™
SRS TruSurrond HD™
Rocketboost™ settings
Manually adjust audio
Audio only (no video)
TV speakers
Channels & providers
Devices
Network
Recommendations
Video
Appearance
Audio
A
udio
Alternate audio
Current setting:
On
Dolby Digital
This allows the TV to send the
audio signal to another device
through the HDMI port.
Audio return channel (ARC)
Reset all audio settings

Insignia NS-42E859A11 Specifications

General

Display diagonal	42 \
Display brightness	450 cd/m²
Supported video modes	1080p
Contrast ratio (dynamic)	12000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Backlight	-
Headphone connectivity	3.5 mm
HDMI ports quantity	4
DVI-D ports quantity	1
DVI-I ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	Not supported
Product color	Black
Panel mounting interface	200 x 200 mm
RMS rated power	- W
Number of speakers	3
Power consumption (standby)	1 W
Power consumption (typical)	115 W
Remote control type	Standard

Weight and Dimensions

Depth (with stand)	279.4000 mm
Weight (with stand)	17780.8209 g
Depth (without stand)	50.8000 mm
Width (without stand)	990.6000 mm
Height (without stand)	609.6000 mm
Weight (without stand)	14605.6743 g