Insignia NS-42E859A11 - Connecting an Analog Audio Receiver; Connecting Your TV to Your Home Network; Wireless Connection

26
www.insigniaproducts.com
Getting Started NS-32E859A11/NS-42E859A11
Connecting an analog audio receiver
To connect an analog audio receiver:
1 Make sure that your TV’s power cord is unplugged and the
analog audio receiver is turned off.
2 Connect an audio cable (not provided) to the Audio Out
jack on the side of your TV and to the AUDIO IN jacks on
the analog audio receiver.
Connecting your TV to your
home network
Wireless connection
Your TV has a built-in wireless WiFi device that lets you access
the Internet through your home network. With this feature,
you can easily connect to a wireless network and enjoy the
benefits of networking in a cable-free environment.
To connect to a wireless network:
For step-by-step instructions to set up a wireless Internet
connection, see “Configuring a wireless connection” on
page 81.
Note
To hear sound only from the receiver, turn off the TV
speakers. For more information, see “Turning your TV
speakers on or off” on page 50.
Side of TV
Analog audio receiver
GAMECH