EasyManua.ls Logo

Instron DX Series - Noise Level

Instron DX Series
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Noise level
Product Support: www.instron.com
Noise level
The A-weighted emission sound pressure level generated by the testing system under normal operating
conditions does not exceed 70 dBA. The peak C-weighted instantaneous sound pressure value does not
exceed 63 Pa.
Since many variables (such as room layout) affect noise levels, it can not be assumed that these readings
will be equal to those in the field. The noise level readings were taken at a location in front of the system
as shown in Figure 4. This is the typical location for an operator to stand when operating the system.
Figure 4. Location of noise level reading.
Frame
Operator
Approximately 500 mm (18 in)

Table of Contents

Other manuals for Instron DX Series

Related product manuals