EC Declaration of conformity for machinery
(Machinery Directive 2006/42/EC, Annex II., sub. A)
900 Liberty Street, Grove City, PA, 16127, USA
Instron - Division of ITW Limited, Coronation Road, High Wycombe, Buckinghamshire, HP12 3SY,
United Kingdom
Herewith we declare that
Model Number:
Serial Number:
is in conformity with the provisions of the following other EC-Directives
And furthermore, we declare that
Place of Issue: Grove City, PA USA Signature:
Stephen A. Somple
R&D Engineering Manager
BS EN 60204-1: 2006 Safety of Machinery, Electrical Equipment of Machines
EN ISO 12100: 2010 Safety of machinery - General principles for design - Risk assessment and risk
reduction
EN ISO 13849-1: 2008 Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
BS EN 61326-1: 2006 Electrical Equipment for Measurement, Control and Laboratory Use - EMC
Requirements
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
Instron, a division of Illinois Tool Works, Inc. - Industrial Products GroupManufacturer:
Address:
Address:
Name and address of the person authorised to compile the technical file:
Name: Jonathan Snell
the following (parts/clauses of) European harmonised standards published in the Official Journal have been used
the following (parts/clauses of) other European harmonised standards, technical standards and specifications have
been used
Date of Issue:
z
z
z
z
is in conformity with the relevant provisions of the Machinery Directive (2006/42/EC)
Supplier’s declaration of conformity (in accordance with ISO/IEC 17050-1)
To Next Page
Loading...
Need help?
General
