Appendix : Grip Jaws
94
300DX-G7
W-5246-A
Flat-face
0-16 mm (0-0.63 in)
20 tpi,
horizontal,
65 deg.
70 x 76 mm
(2.75 x 3 in)
60 mm
(2.4 in)
W-5246-B 16-32 mm (0.63-1.26 in)
W-5246-C 32-50 mm (1.26-1.97 in)
W-5247-A
Vee-face
3-10 mm (0.12-0.39 in) 20 tpi,
horizontal,
65 deg.
W-5247-B 10-20 mm (0.39-0.79 in)
W-5247-C 20-30 mm (0.79-1.18 in) 10 tpi,
horizontal,
65 deg.
W-5247-D 30-40 mm (1.18-1.57 in)
600DX-G7
W-5197-A
Flat-face
0-30 mm (0-1.18 in) 20 tpi,
horizontal,
65 deg.
100 x 100 mm
(4 x 4 in)
80 mm
(3.2 in)
W-5197-B 30-60 mm (1.18-2.36 in)
W-5198-A
Vee-face
3-10 mm (0.12-0.39 in) 20 tpi,
horizontal,
65 deg.
W-5198-B 10-35 mm (0.39-1.38 in)
W-5198-C 35-57 mm (1.38-2.25 in)
10 tpi,
horizontal,
65 deg.
1. Flat-face grip jaws are for testing square or rectangular specimens.
Vee-face grip jaws are for testing round specimens.
2. For flat-face grip jaws this is the specimen thickness.
For vee-face grip jaws this is the specimen diameter.
Table 19. Available grip jaws and their specifications. (Continued)
Frame Model
Grip Jaw
Catalog
Number
Jaw
Type
1
Specimen
Range
2
Tooth
Profile
Jaw Face Size
(W x H)
Minimum
Engagement
To Next Page
Loading...
