Instruo arbhar - Onset Control Modes; Alpha, Beta, Gamma, Delta Modes

24
Onset Control Modes
arbhar features four different Onset Control Modes that determine how
the internal audio analysis functions.
With the Shift Button and the Capture Button held down, turn the Layer
knob to set the Onset Control Mode:
Alpha: The alpha setting will activate capture upon
onset detection.
In this mode, a gate signal will generate from the Gate
Output at the beginning of each grain.
Beta: The beta setting will activate capture upon
onset detection.
In this mode, a gate signal will generate from the Gate
Output upon each onset detection and is set high for
the duration of time set by the Hold parameter.
Gamma: The gamma setting will not activate capture
upon onset detection.
In this mode, a gate signal will generate from the Gate
Output at the beginning of each grain.
Delta: The delta setting will not activate capture upon
onset detection.
In this mode, a gate signal will generate from the Gate
Output upon each onset detection and is set high for
the duration of time set by the Hold parameter.