33
Import & Export
Import: Files can be imported into a layer from the USB flash drive.
• Insert a USB flash drive into the computer.
• Drag and drop the desired file to the _toConvert folder of the USB
flash drive.
• Ensure that there are no spaces within the file names - ‘my sample.
wav’ should be ‘mySample.wav’ or ‘my_sample.wav’.
• The first 13 seconds of the first six files in alphabetical order will be
converted into the optimal format for arbhar. These converted files
will appear in the _userfiles folder on the USB drive.
• Once the files have loaded, eject the USB flash drive from
the computer.
• With arbhar powered off, insert a USB flash drive into the USB port
on the back of arbhar.
• Once the USB flash drive has been inserted, power arbhar on.
• Once arbhar has fully booted, press and hold the Shift Button and
then press the Strike Button for at least (>=) 2 seconds.
Export: Files can be exported from a layer to the USB flash drive.
• With arbhar powered off, insert a USB flash drive into the USB port
on the back of arbhar.
• Once the USB flash drive has been inserted power arbhar on.
• Capture audio into a layer.
• Press and hold the Shift Button and the Capture Button and then
press the Strike Button for at least (>=) 2 seconds.
• The layer will export to the _usersaved folder of the USB flash drive.
as a 48kHz / 24 Bit .wav file. Files saved to the USB flash drive are
not available to load back into arbhar, unless they are moved into
the _toConvert or _userfiles folders of the USB
flash drive.
• If the Export feature is used while the omega layer is selected, all
layers will export simultaneously.
• It is important to note that Importing and Exporting is only possible
on a per layer basis.
To Next Page
Loading...