39
Feedback Capture:
Summary: The monitored output is fed back to the Condenser
Microphone. Feedback is captured, granularised and then monitored.
CAUTION: This patch could harm monitoring systems if feedback is too
loud. Patch at your own risk.
Audio Path:
• Ensure that no cables are connected to the Input or Onset Input.
This ensures that the Condenser Microphone is active.
• Turn on your monitoring system (speaker, headphones, etc.) so that
they are able to feedback into the Condenser Microphone.
• Set the Input Level to a desired position and set the Output Level
fully clockwise. The Input Level controls the amount of feedback.
Output 1
Output 2*
To Next Page
Loading...