30
Feedback/Delay Configuration:
Hardware Configuration Switch Position: A-Y.
Two granular engines (24 grains + 20 grains) and Wavetable Mode.
The MOD CV Input on the CV Expansion Module controls curated
parameters of the feedback/delay.
• A summed dry and wet signal will generate from Output 1 if it’s the
only Output connected.
• Output 1 generates the dry signal when both outputs
are connected.
• Output 2 generates the wet signal only.
• Positive voltage controls delay times between 80ms - 1000ms with
a fixed feedback level of 67% for a more standard echo effect.
• Negative voltage controls delay times between 25ms - 1ms
with a fixed feedback level of 99% for some shimmering Karplus-
Strong effects.
To Next Page
Loading...