INSYS CombiLock 200 simplex - Operating Instructions CombiLock simplex; Programming; Changing Code 2

CombiLock 200 simplex / pro / RFID
Handbuch V.1.05 52 Manual V. 1.05
3 Operating Instructions CombiLock simplex
3.1 Programming / Changing the Code 2
CombiLock simplex 200
(with the electronic lock open only):

 Code 1
(when changing it, input of Code 1 or Code 2)
 new Code 2 (sample code)
 repeat new Code 2
3.2 Deleting Code 2
(with the electronic lock open only):

 Code 1
3.3 Additional Functions CombiLock 200 simplex
In order to Open with Timed Unlocking Delay, enter the Code a second time after
the end of the Release period. In case the second code input is not entered within
the set duration of the release period, opening with timed unlocking delay has to be
restarted from the beginning.
Timed delay 1 - 3 Minutes> Release 1 Minute
Timed delay 4 - 10 Minutes> Release 2 Minutes
Timed delay 11 - 99 Minutes> Release 3 Minutes
Sequence of functions with timed delay set to 6 minutes
  
Timed delay
set to last 6 minutes
Release period lasts
2 minutes with timed delay
lasting 4-10 minutes
10 sec time span
for opening,
cannot be set
Enter Code 1 or 2
Enter Code 1 or 2 again
during the release period
Open lock within 10 sec
after entering the Code
for the 2
nd
time