CombiLock 200 simplex / pro / RFID
Handbuch V.1.05 60 Manual V. 1.05
5.2 Opening with Additional RFID Release
Q p After the system has been separated from
power supply, after a battery change, for
example, after opening the keypad cover or after
wrong code has been entered for at least 4
times
> enter PIN and Code twice.
CODE
PIN for Master = , for User 1 to 9 = to
Q After the opening code has been entered:
The green LED is illuminated for about 10
seconds, during which the transponder signal
can be received (RFID release).
Q p
Move the RFID transponder card or the RFID
key fob close to digit 0. When the transponder
has been identified, the green LED illumination
ceases and the lock opens.
After code input, open the electronic lock within 10 seconds by turning the keypad.
If the electronic lock is not opened within 10 seconds, it will close automatically.
Lock Lock
CLOSED OPEN
To Next Page
Loading...
