INSYS CombiLock 200 simplex - Timed Delay and Release Period; Setting Timed, Alarm, and Release Periods; Configuring Timed Delay

CombiLock 200 simplex / pro / RFID
Handbuch V.1.05 56 Manual V. 1.05
4.7 Timed Delay and Release Period
Sequence of functions with timed delay (01-99 minutes) and release period (00 minutes)
 
Timed delay period
Can be set to last max.99 minutes
10 sec time span for
opening, cannot be set
Sequence of functions with timed delay (01-99 minutes) and release period (01-15
minutes)
  
Timed delay period
Can be set to last max.99 minutes
Release period lasts
2 minutes with timed delay
lasting 4-10 minutes
10 sec time span
for opening,
cannot be set
4.8 Setting Timed -, Alarm Delay and Release Period
Start within 10 sec. after opening the lock; parameters can also be set singularly.

 Q Master CODE (sample code illustrated)
 Q pTimed delay (from  for 1 minute
to  for 99 minutes)
 Q pAlarm delay (from  to  for 1-99 minutes),
to begin at the time a silent alarm is triggered
 Q pRelease period (from  to  for 1- 15 minutes.)
Enter  in order to set no release period
The release period begins after timed – and after alarm delay.
Enter PIN and Code
Open lock within 10 sec
Enter PIN and Code
Enter PIN and Code again
within the release period
Open lock within 10 sec
after entering PIN and Code
for the 2
nd
time