INSYS CombiLock 200 simplex - Opening with Active Delays; Disabling the Lock; Lock Disabled State Explanation

CombiLock 200 simplex / pro / RFID
Handbuch V. 1.05 57 Manual V.1.05
4.9 Deleting the Timed Delay, the Alarm Delay
and the Release Period
(start within 10 sec. after opening the lock; parameters can also be deleted singularly)

 Q Master CODE (exemplary code illustrated)
 Q pDelete timed delay
 Q pDelete alarm delay
 Q pDelete release period
4.10 Opening with Timed Delay, Alarm Delay and
Release Period
 PID  or any PIN up to PID  for one of the
users 1-9
 Q User CODE (sample code illustrated)
Green Q flashes (5 sec. interval)
15 x p Timed delay ends,
start of release period.
 PID  or any PIN up to PID  for one of the
users 1- 9
 Q p User CODE (sample code illustrated)
Lock cleared for opening.
4.11 Disabling the Lock
(with electronic lock closed only):
After disabling the lock, it will remain inaccessible until the Master enables it again
(see below).

 Q Master CODE (sample code illustrated)
 Q pLock disabled