CombiLock 200 simplex / pro / RFID
Handbuch V. 1.05 65 Manual V.1.05
6.2 Special Signals CombiLock 200 RFID
Optical and acoustic signal output during PIN- and CODE input
Q Red LED signal after the PIN has been
entered.
Lock is closed:
A timer program is active.
Lock has been disabled by
the master user.
Lock has been disabled by
the connected burglar alarm
system.
p 12 tone signal after the CODE has been
entered.
Invalid CODE entered.
Enter PIN and CODE again.
p 12 tone signal after the RFID-
transponder PIN has been read.
Wrong RFID transponder
RFID transponder cannot be
read.
Green LED Q flashes every second.
Open the electronic lock within
10 seconds by rotating the keypad.
We shall not accept any liability for functional disruptions caused by incorrect operation
or the use of force or improper treatment or for damage to materials or property that is,
for example, attributable to not locking the safe properly.
In case the safe does not open even though you have proceeded correctly
according to the present instructions, please contact the manufacturer of the safe.
To Next Page
Loading...
