INSYS CombiLock 200 simplex - Deleting the RFID Assignment; Testing RFID Transponder Assignment; Verifying RFID Tag Assignment

CombiLock 200 simplex / pro / RFID
Handbuch V.1.05 62 Manual V. 1.05
5.3.2 Deleting the RFID Assignment
Start within 10 sec. after opening:

     for PIN user 1 to  for PIN user 9

 Q CODE of the master (exemplary code)
 Q  Digit 0 for deleting transponder assignment
Q p
5.3.3 Testing the Assignment of a RFID Transponder
Start within 10 sec. after opening:

     for PIN user 1 to  for PIN user 9

 Q CODE of the master (exemplary code)
 Q  Digit 2 for testing transponder assignment

Move the RFID transponder card or the RFID
key fob close to digit 0. When the transponder
has been identified and saved, an acknowledge
signal sounds.
   Q p


