EasyManuals Logo

Integra DTM-5.3 User Manual

Integra DTM-5.3
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AV Receiver
DTM-5.3
Instruction Manual
Thank you for purchasing the Integra AV Receiver.
Please read this manual thoroughly before mak-
ing connections and plugging in the unit.
Following the instructions in this manual will
enable you to obtain optimum performance and
listening enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Before using
Important Safeguards..........................2
Precautions ...........................................3
Features.................................................4
Supplied accessories ...........................4
Facilities and connections
Remote controller description ............5
Front panel description........................6
Rear panel description ........................8
Connecting components .................10
Connecting speakers ........................12
Connecting antennas .......................13
Connecting the remote zone
(Zone 2) ............................................14
Operating components not
reached by the remote
controller signals (IR IN/OUT) ..........15
Connecting the power......................16
Installing the remote controller
batteries ...........................................17
Setup and operation
Basic operations .................................18
Receiving stations ..............................20
Entering station names ......................23
Recording a source ...........................24
Using Tape 2 Monitor .........................26
Enjoying music in the remote zone
...27
Remote controller
Using the remote controller...............28
Controlling other components .........29
Appendix
Troubleshooting guide.......................31
Specifications ..........back cover page

Other manuals for Integra DTM-5.3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DTM-5.3 and is the answer not in the manual?

Integra DTM-5.3 Specifications

Amplifier Section IconAmplifier Section
power output100 Watts per channel
dynamic power output at 2 ohms2 × 170 Watts
dynamic power output at 4 ohms2 × 135 Watts
dynamic power output at 8 ohms2 × 140 Watts
total harmonic distortion at rated power0.08%
IM distortion at rated power0.08%
damping factor60 at 8 ohms
phono input sensitivity and impedance2.5 mV, 50 kohms
line input sensitivity and impedance150 mV, 50 kohms
video input sensitivity and impedance1 Vp-p, 75 ohms
phono overload120 mV RMS at 1 kHz
Tuner Section FM IconTuner Section FM
tuning range87.5 to 108.0 MHz
usable sensitivity mono11.2 dBf, 1.0 µV
usable sensitivity stereo17.2 dBf, 2.0 µV
signal-to-noise ratio mono76 dB
signal-to-noise ratio stereo70 dB
total harmonic distortion mono0.15%
total harmonic distortion stereo0.25%
Tuner Section AM IconTuner Section AM
tuning range530 to 1, 710 kHz
usable sensitivity30 µV
image rejection ratio40 dB
signal-to-noise ratio40 dB
total harmonic distortion0.7%
General IconGeneral
power supplyAC 120 V, 60 Hz
power consumption2.8 A
dimensions17-1/8" × 5-7/8" × 13-7/16"
weight19.8 lbs.

Related product manuals