24
Recording a source
Recording an audio source
Please read the instruction manuals concerning operation of each
unit.
1 Insert a blank tape into the tape deck.
2 Press the button (other than Tape 2 Monitor) for the
source you wish to record.
• When DVD or Video is selected, the audio portion of the pro-
gram will be recorded.
• When FM or AM is selected, set the tuner to the station from
which you wish to record.
• When TAPE 1 is selected, it will record to TAPE 2.
• When either DVD, Video, FM, AM, Phono or CD is selected,
you will be able to record to both TAPE 1 and TAPE 2.
3 Put the tape deck in recording mode. Begin playing the
source.
Set the proper recording level using the recording controls on
the tape deck. During recording and dubbing operations, if any
controls (bass, treble etc.) on the unit are changed, the tone will
not change.
Note:
Recording from TAPE 2 to TAPE 1 is not possible.
Tape-to-Tape dubbing
1 Load the original tape in the TAPE 1 tape deck and a
blank tape in the TAPE 2 tape deck.
2 Press the Tape 1 button.
3 Place the TAPE 1 tape deck in playback mode and the
TAPE 2 tape deck in recording mode.
Standby/On
Speakers
A
B
Phones
Bass
Treble Balance
L
R
Master Volume
Video
Tape 2
Monitor
Tape 1
FM
AM Phono CDDVD
Zone 2 Off
Memory
Clear
Character
Direct Tuning
FM Mode
Display
Standby
DTM
-
5.3
1 ABC 2 DEF 3 GHI
4 JKL
5 MNO 6 PQR
7 STU 8 VWX 9 YZ
-
Direct Tuning 0
/
10
/
Scan
Input selector buttons
Input selector
Video
Tape 2
Monitor
Tape 1DVD
FM
AM Phono CD
DTM-5.3
Recording Playback
Turntable
Tape deck
(TAPE 1, TAPE 2)
CD player
VCR, VDP
Tape 1
DTM-5.3
Recording Playback
Tape deck (TAPE 1)
Tape deck (TAPE 2)
To Next Page
Loading...
Need help?
Amplifier Section
