Integra DTR-7.4 - Operating Onkyo Products Using the Remote Controller; Operating Onkyo Products Using the Connection; DVD Mode

84
Operating Onkyo Products Using the Remote
Controller
The RC-550M remote controller is a useful tool that can
not only operate the DTR-7.4, but also all the other com-
ponents of your home theater as well. To operate any
component, first press the Mode button on the remote
controller that corresponds to the component that you
wish to control. Then simply press the desired operation
button and the component will operate accordingly.
To operate a digital satellite tuner, cable, VCR, or televi-
sion with the remote controller, first program the signal to
the button.
There are two methods. One method is selecting the
name of a different brand from the table, entering the
setting number listed, and calling up the pre-program-
ming code (See page 89). The other method is sending
the commands from the other brand’s remote control
directly into this remote controller (See page 94).
Connecting your -compatible Onkyo CD player, MD
recorder, DVD player, or cassette recorder to the
DTR-7.4 via allows you to control your system with
the DTR-7.4’s remote controller by pointing it at the
DTR-7.4. This allows you to control components that are
out of sight, for example, in a cabinet. Since you don’t
have to enter any special codes, or do any programming,
allows you to control these components quickly and
easily. See page 26 for connection information.
Note:
To use the function, you must make an connec-
tion and an analog RCA/phono connection between the
AV component and your DTR-7.4, even if they are con-
nected digitally.
DVD mode is used to control an Integra/Onkyo DVD
player connected to the DTR-7.4 via . To select
DVD mode, press the Mode button, and then roll the
scroll wheel until “DVD” appears on the display.
Operating Onkyo Products Using the
Connection
1
Press the Mode button.
2
Roll the scroll wheel to select your favor-
ite mode.
• When operating the Onkyo cassette tape deck,
press the Mode button.
• When operating the Integra/Onkyo DVD
player, select “DVD.”
• When operating the Integra/Onkyo CD player,
select “CD.”
• When operating the Onkyo MD player, select
“MD.”
Custom
Dimmer Sleep
Zone 2
InputMode
Macro
Mode button Scroll wheel
Note:
While neither the Input button nor Mode button
is illuminated, the scroll wheel changes the input
source and remote controller mode simulta-
neously (e.g., set the input source and mode to
“DVD.”)
3
Point the remote controller at the DTR-7.4
and press the desired operation button.
DVD Mode
--
/
---
@. - ' / ABC DEF
PQRS TUV WXYZ
GHI JKL MNO
TV CH
TV VOL
RC
-
550M
+
10 0
123
456
789
THX
DSP DSP
+
-
+
-
Direct Tuning
Caps Delete Language Loca t ion
Album Ar tist GenrePlaylist
Custom
Display
Dimmer
T V
Input
Sleep
Muting
AngleSubtitleAudio
MemorySearchA
-
BRepeat
T V
On Standby
A
u
d
i
o
A
D
J
E
x
i
t
G
u
i
d
e
Random
Step / Slow
Rec
Last Memory
Clear
Input
T
o
p
M
e
n
u
M
e
n
u
S
e
t
u
p
R
e
t
u
r
n
Zone 2
InputMode
Macro
CH
VOL
Disc
Test Tone CH SEL
Pure A
Surround
Direct
Stereo
Re
-
EQ
All CH ST
Level
+
Level
-
L Night Audio SEL
Enter
Scroll wheel