97
Using the Remote Controller with Other Components—Continued
Reordering the Remote Controller Modes
You can change the order in which the remote controller
modes appear when you roll the scroll wheel. The posi-
tion of the AMP mode cannot be changed.
Deleting Remote Controller Modes
You can delete remote controller modes that you don’t
need, such as modes for components that you don’t
have.
The AMP mode cannot be deleted.
4
Roll the scroll wheel to select the
type of mode you want to add, and
then press the scroll wheel.
You can add up to 8 additional modes:
4 DVD, 2 TV, 1 VCR, and 1 CBL.
1
Press and hold the Custom button
for more than three seconds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
“MODE,” and then press the scroll
wheel.
3
Roll the scroll wheel to select
“SORT,” and then press the scroll
wheel.
4
Roll the scroll wheel to select the
mode you want to move, and then
press the scroll wheel.
Custom
5
Roll the scroll wheel to select the
mode before which you want to
insert the specified mode, and
then press the scroll wheel.
Here the specified mode will be inserted
before the “VCR” mode.
If the move is successful, after “OK” has
been displayed, the SORT display (step
3) reappears.
1
Press and hold the Custom button
for more than three seconds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
“MODE,” and then press the scroll
wheel.
3
Roll the scroll wheel to select
“DEL,” and then press the scroll
wheel.
Custom
Remote Controller
To Next Page
Loading...
Need help?
General
