Integra DTR-7.6 User Manual

10
Getting to Know the AV Receiver —Continued
A
OPTICAL DIGITAL
These optical digital audio inputs are for connecting
components with optical digital audio outputs, such
as CD players and DVD players.
The optical digital audio output is for connecting a
digital recorder with an optical digital input, such as
a CD recorder.
B
COAXIAL DIGITAL
These coaxial digital audio inputs are for connect-
ing components with coaxial digital audio outputs,
such as CD players and DVD players.
C
REMOTE CONTROL
This (Remote Interactive) jack can be con-
nected to the jack on another -capable Inte-
gra component, for remote and system control.
To use , you must make an analog audio connec-
tion (RCA) between the AV receiver and the other
component, even if they are connected digitally.
Rear Panel
3 4 86 95 J K21
XYZ
7
QR S
LM
TU
N
V
WP
O
DTR-7.6
Only on the North American model
34 86 9 J K21
7
QR S
L M
TU
N
VXWYZP
O
DTR-6.6
Only on the North American model
DTR-7.6,6.6.book Page 10 Monday, September 26, 2005 1:40 PM

Integra DTR-7.6 Specifications

General

Brand	Integra
Model	DTR-7.6
Category	Receiver
Language	English