Using the Setup Program
30
Function Keys
Table 3 shows the function keys available for menu screens.
Table 3. Setup Function Keys
Setup Key Description
<F1> or <Alt-H> Brings up a help screen for the current item.
<Esc> Exits the menu.
<←> or <→>
Selects a different menu screen.
<↑> or <↓>
Moves cursor up or down.
<Home> or <End> Moves cursor to top or bottom of the window.
<PgUp> or <PgDn> Moves cursor to top or bottom of the window.
<F5> or <-> Selects the previous value for a field.
<F6> or <+> or <Space> Selects the next value for a field.
<F9> Load the default configuration values for the current menu.
<F10> Save the current values and exit Setup.
<Enter> Executes command or selects the submenu.
Maintenance Menu
Use this menu to specify the processor speed and clear the Setup passwords. Setup only displays
this menu in configure mode (see page 26).
Table 4. Maintenance Menu
Feature Options Description
Processor Speed
• 200
• 233
• 266
• 300
Specifies the processor speed in megahertz.
Clear All Passwords No options Clears the user and supervisor passwords.
To Next Page
Loading...
Need help?
General
