Intel AL440LX User Manual

AL440LX Motherboard Product Guide
39
Boot Menu
Use this menu to specify the boot features and the boot sequence.
Table 16. Boot Menu
Feature Options Description
Restore on
AC/Power Loss
• Stay Off
• Last State
(default)
• Power On
Specifies how the computer responds following a power
failure.
Stay Off keeps power off until power button pressed.
Last State restores previous power state before a power
failure.
Power On restores power without restoring previous
power state.
On Modem Ring
• Stay Off
• Power On (default)
Specifies how the computer responds to an incoming call
on an installed modem when the power is off.
On LAN
• Stay Off
• Power On (default)
Specifies how the computer responds to a LAN wakeup
event when the power is off.
On PME
• Stay Off
• Power On (default)
Specifies how the computer responds to a PCI power
management enable event when the power is off.
QuickBoot Mode
• Enabled
• Disabled (default)
Enables the computer to boot without running certain
POST tests.
Scan User Flash
Area
• Enabled (default)
• Disabled
Enables the BIOS to scan the flash memory for user
binary files that are executed at boot time.
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
• Removable devices
• Hard Drive
• ATAPI CD-ROM
Drive
• Network boot
Specifies the boot sequence from the available devices.
To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <+> to move the device up the list or <-> to
move the device down the list.
The operating system assigns a drive letter to each boot
device in the order listed. Changing the order of the
devices changes the drive lettering.
Hard Drive, submenu No options Lists available hard drives. When selected, displays the
Hard Drive submenu.
Removable Devices,
submenu
No options Lists available removable devices. When selected,
displays the Removable Devices submenu.

Intel AL440LX Specifications

General

Brand	Intel
Model	AL440LX
Category	Motherboard
Language	English