116
f) Select the C: partition and press Enter. Setup will continue as normal.
7.4.3 Slipstream install
There are several tools available that can create a slipstream image. This document
uses the nLite* 1.4.9.1 tool.
1. Download and install nLite from: http://www.nliteos.com/index.html.
2. Download either the STOR_10.1.0.1008_f6flpy-x86.zip or
STOR_10.1.0.1008_f6flpy-x64.zip SATA Driver files from here.
3. Extract the Intel® Rapid Storage Technology F6 Driver files.
4. Download the Windows XP installation ISO or insert the Windows XP installation
Disk into the disk drive.
5. Start the nLite tool.
a. Select your language and click Next
To Next Page
Loading...
