Intel Atom N2800 User Manual


46
2.15.1.2 Wake-up Devices and Events
Table 11 lists the devices or specific events that can wake the development kit from
specific states.
Table 11. Wake-up Devices and Events
Devices/events that wake up the system…
…from this sleep state
…from this global state
Power switch
S3, S4, S5
(
Note 1)
G1, G2, G3
RTC alarm
S3, S4, S5
(Note 1)
G1, G2
(Note 3)
LAN
S3, S4, S5
(Note 1)
G1, G2
(Note 3)
USB
S3
G1
WAKE#
S3, S4, S5
(Note 1)
G1, G2
(Note 3)
Serial port
S3
G1
Notes:
1. S4 implies operating system support only.
2. Wake from S4 and S5 is recommended by Microsoft.
3. Wake from device/event not supported immediately upon return from AC loss.

NOTE
The use of these wake-up events from an ACPI state requires an operating system that
provides full ACPI support. In addition, software, drivers, and peripherals must fully
support ACPI wake events.
2.15.2 Hardware Support
The board provides several power management hardware features, including:
 Instantly Available PC technology
 Fan headers
 LAN wake capabilities
 Wake from USB
 WAKE# signal wake-up support
 Wake from serial port
 Wake from Power Button signal
 Standby Power Indicator LED

NOTE
The use of Wake from USB from an ACPI state requires an operating system that
provides full ACPI support.

Intel Atom N2800 Specifications

General

Brand	Intel
Model	Atom N2800
Category	Computer Hardware
Language	English