77
3.6.3.1 Installing a PCI Express Mini & Full Card in the PCI
Express Full-/Half-Mini Card Slot
A PCI Express Full-Mini or Half-Mini Card can be installed in the Embedded
Express Full and/or Half-Mini Card slot.
To install a PCI Express Full-Mini Card in this slot, see Figure 23 and follow these
steps:
1. Observe common sense ESD precautions
2. Locate the PCI Express Full-/Half-Mini Card slot
3. Insert the card into the PCI Express Mini Card connector (see Figure 23 A) at a
slightly upward angle.
4. Align the mounting holes and secure the card in place (see Figure 23 B).
To install a PCI Express Half-Mini Card in this slot, see Figure 23 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 15.
2. Locate the PCI Express Full-/Half-Mini Card slot
3. If necessary, move the mounting standoffs to the location shown in Figure 23 C.
4. Insert the card into the PCI Express Mini Card connector (see Figure 23 D) at a
slightly upward angle.
5. Align the mounting holes and secure the card in place (see Figure 23 E).
To Next Page
Loading...
