EasyManuals Logo
Home>Intel>Motherboard>D102GGC2

Intel D102GGC2 User Manual

Intel D102GGC2
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Intel Desktop Board D102GGC2 Product Guide
24
Installation Precautions
When you install and test the Intel desktop board, observe all warnings and cautions in the
installation instructions.
To avoid injury, be careful of:
Sharp pins on connectors
Sharp pins on printed circuit assemblies
Rough edges and sharp corners on the chassis
Hot components (like processors, voltage regulators, and heat sinks)
Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.
Prevent Power Supply Overload
Do not overload the power supply output. To avoid overloading the power supply, make sure that
the calculated total current loads of all the modules within the computer is less than the output
current rating of each of the power supplies output circuits.
Observe Safety and Regulatory Requirements
Read and adhere to the instructions in this section and the instructions supplied with the chassis and
associated modules. If you do not follow these instructions and the instructions provided by chassis
and module suppliers, you increase safety risk and the possibility of noncompliance with regional
laws and regulations.
Refer to Appendix B for safety and regulatory requirements.

Table of Contents

Other manuals for Intel D102GGC2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel D102GGC2 and is the answer not in the manual?

Intel D102GGC2 Specifications

General IconGeneral
Number of memory slots2
Maximum internal memory2 GB
Supported memory clock speeds400, 533 MHz
Processor socketLGA 775 (Socket T)
Number of SATA connectors4
ATX Power connector (24-pin)Yes
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity1
Firewire (IEEE 1394) ports0
Power source typeATX
Audio output channels- channels
Motherboard form factormicro ATX
Compatible operating systemsMicrosoft Windows XP/2000
On-board graphics cardNo
Parallel processing technology supportNot supported
Networking featuresFast Ethernet
Weight and Dimensions IconWeight and Dimensions
Depth218.44 mm
Width243.84 mm

Related product manuals