Using the BIOS Setup Program
65
Table 17. Primary/Secondary IDE Master/Slave Submenus (continued)
Feature Options Description
DMA Mode
• Auto (default)
• SWDMA 0
• SWDMA 1
• SWDMA 2
• MWDMA 0
• MWDMA 1
• MWDMA 2
• UDMA 0
• UDMA 1
• UDMA 2
• UDMA 3
• UDMA 4
• UDMA 5
Specifies the Ultra DMA mode for the drive.
Cable Detected
(Note)
None Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for
ATA-66/100 devices).
Note: These configuration options appear only if an IDE device is installed.
To Next Page
Loading...
Need help?
General
