Using the BIOS Setup Program
73
Removable Devices Submenu
Maintenance Main Advanced Security Power Boot Exit
Removable Devices
The submenu in shown Table 29 is for setting removable devices.
Table 29. Removable Devices Submenu
Feature Options Description
1
st
Removable Device
(Note)
Dependent on installed
removable devices
Specifies the boot sequence from the available
removable devices. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the
intended boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to four removable devices, the maximum number of removable devices supported by the BIOS.
ATAPI CD-ROM Drives
Maintenance Main Advanced Security Power Boot Exit
ATAPI CD-ROM Drives
The submenu shown in Table 30 is for setting ATAPI CD-ROM drives.
Table 30. ATAPI CD-ROM Drives Submenu
Feature Options Description
1
st
ATAPI CD-ROM Drive
(Note)
Dependent on installed
ATAPI CD-ROM drives
Specifies the boot sequence from the available
ATAPI CD-ROM drives. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the
intended boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display
up to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS.
To Next Page
Loading...
Need help?
General
