Intel Education Content Access Point User Manual

Getting Started for Admins
Intel® Education Content Access Point
January 2015 User Manual
Document Number: 331819-001EN 11
2.4 Device placement location
For best signal strength, put the Intel® Education Content Access Point:
 In an open area.
 High off the floor.
 Away from magnetic and large metal objects.
 At least 3 feet (1 meter) from client devices.
2.5 Mounting
The Intel® Education Content Access Point comes with a mounting kit. To mount it, follow this diagram (Figure 4).
Figure 4: Mounting diagram
2.6 Setup
1. Connect the Intel® Education Content Access Point to a network (WAN) with an Ethernet cable. (See Figure 5.)
TIP! For 3G/4G/LTE cellular-based WAN connection, see 5.8.2 (Cellular-based WAN).
2. Connect the power supply.
Figure 5: Connect the cables
3. Power up the device by pressing and holding the power button for two seconds. (See Figure 6.)

Intel Education Content Access Point Specifications

General

Brand	Intel
Model	Education Content Access Point
Category	Wireless Access Point
Language	English