Intel Education Content Access Point User Manual

Advanced Admin Guide
Intel® Education Content Access Point
User Manual January 2015
42 Document Number: 331819-001EN
Reboot the device for the changes to take effect.
Figure 44: Admin - Account settings
5.11 Device management
5.11.1 Update firmware
CAUTION: The device will reboot as part of the firmware update process. This will temporarily disrupt network and
content access for users.
Go to Device Management > Firmware Update. (See Figure 45.)
Select the method of supplying the firmware file.
a. Upload the file from the local computer.
b. Use a USB flash drive. For this method, format a USB flash drive (NTFS or FAT32), put the file on it,
plug it into the USB port of the device, and refresh the Device Management page. The file will appear
following “Update firmware from USB port”.
Note: The firmware update file’s extension must be “.tgz”. If the browser changed the file’s extension during
the download process, change it back to “.tgz”.
Click Update.
Wait a couple of minutes for the upgrade to complete.
Verify that the upgrade was successful by logging on and checking the firmware version on the Dashboard.

Intel Education Content Access Point Specifications

General

Brand	Intel
Model	Education Content Access Point
Category	Wireless Access Point
Language	English