EasyManuals Logo
Home>Intel>Server Board>S2600WT

Intel S2600WT User Manual

Intel S2600WT
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
66
5.7 1U / 2U PCIe* Riser Card Accessory/Spare FRU Options
The Intel® Server Board S2600WT provides three riser slots. Riser slots 1 and 2 are capable of supporting different riser card options to meet needs of specific
system configurations. Riser card options for riser slots 1 and 2 are common. Riser slot 3 is only supported in 2U system configurations and can only support a riser
capable of supporting low profile PCIe* add-in cards.
All PCIe* bus lanes to the riser slots are routed from the processors. Riser slot 1 has a total of 24 PCIe* 3.0 bus lanes routed from both processors; 16 lanes from
procesor #1 and 8 lanes from processor #2. Riser slot 2 has a total of 24 PCIe* 3.0 bus lanes routed from CPU 2. For riser slot 3, all PCIe* bus lanes are routed from
CPU 2; 8 PCIe* bus lanes are PCIe* 3.0 compatible and 4 PCIe* lanes are PCIe* 2.0 compatible. See the product Technical Product Specification (TPS) for additional
information.
Riser slots 1 and 2 are capable of supporting up to 100W maximum power each. Available power to each add-in card slot on a given riser card is defined by the PCIe*
specification. The server board provides two Auxiliary 12V power connectors that when cabled (iPC AXXGPGPUCABLE), can provide additional power to high power
PCIe* add-in cards.
5.7.1 1U Riser Card Options
Intel Product Code Order Information
Product Description Product Type
iPC F1UL16RISER2
MM# 934884
UPC
00735858288682
EAN
5032037067966
MOQ – 1
1U 1-slot PCIe riser card option
One PCIe* add-in card slot PCIe* x16, x16 mechanical
Kit includes:
(1) Riser card PCBA
1U Building Block Accessory Kit
1U Spare FRU
Each riser card assembly has support for a single full height, ½ length PCIe* add-in card. However, riser card #2 may be limited to ½ length, ½ height add-in cards if
either of the two mini-SAS HD connectors on the server board are used.
Note: Add-in cards that exceed the PCI specification for ½ length PCI add-in cards (167.65mm or 6.6in) may interfere with other installed devices on the server
board.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel S2600WT and is the answer not in the manual?

Intel S2600WT Specifications

General IconGeneral
BrandIntel
ModelS2600WT
CategoryServer Board
LanguageEnglish

Related product manuals