Intel S2600WT User Manual

Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
32
Multiport MiniSAS Connector
Image
Description
SFF-8087
Support for up to 6 Gb/Sec SAS / SATA devices
Where used:
- All 6 Gb/sec SAS RAID Controllers
- All 6 Gb/sec SAS Expander Cards
When connecting a 6Gb/sec SAS Controller or SAS Expander to a 12 Gb/sec capable hot swap backplane, the data cables used will need a SFF-8643 connector on
one end of the cable and a SFF-8087 connector on the other. See Table 11. Storage Data Cable Kit Description and Order Information for appropriate cable kits.
4.2 1U / 2U Server System SAS / SATA Cable Guide
Product tables in this section will reference SAS/SATA cables using different connector types to meet the connection and routing requirements for the specified
system configuration. Each cable reference and product code will identify the connector type at each end of the cable using the following identifiers: HR, HD, and
MS. The following table identifies the three cable connector types and their identifiers.
HR = Right Angle SFF-8643 Mini SAS HD Connector
HD = Straight SFF-8643 Mini SAS HD Connector
MS = Straight SFF-8087 Mini SAS Connector (compatible with 6Gb/sec SAS controllers and expanders)
Cable Kit Product Code Example - AXXCBL950HDMS
AXXCBL – Identifies an accessory cable kit
950 – identifies the length of the cable
HD – identifies that one end of cable connector supports SFF-8643 connector

Intel S2600WT Specifications

General

Brand	Intel
Model	S2600WT
Category	Server Board
Language	English