t100W/t100Q – Marine Satellite Television System
28
Remove the Shipping Brackets
Open the radome's hatch and remove the shipping restraints from the pedestal.
Using your hand, gently check that the antenna moves freely in azimuth, elevation,
and cross level without hitting any part of the radome's interior.
Warning: : Please ensure that your Intellian system is ALWAYS powered ON upon
leaving the dock. Failure to follow these instructions could result in damaging
mechanical parts in the antenna and/or possibly voiding your warranty. Intellian
strongly recommends restraining the antenna pedestal properly while underway when
power is removed from the antenna. The normal operating condition is to remain
powered on at all times.
Flat-Head Screwdriver
(min 5mm)
Radome Hatch
NOTE: The pictures provided are t100W, but the description is the same for both t100W
and t100Q.
To Next Page
Loading...
Need help?
General
