CW250, Users
Rev M, April 2018
Page 11 of 31
ACCUMULATE NOTE: The scale will not accumulate when the weight is
negative, zero, or if the weight is in motion. The protections are added to ensure
only valid readings are accumulated into the total. An error message "." will
be displayed when any of the three conditions are present. At the completion of
a successful accumulation, the scale must be returned to zero before the next
accumulation can be attempted. If an attempt is made to accumulate the next
weight before allowing the scale to return to zero, the error message ".” will
be displayed.
To Next Page
Loading...
