Intergas Xtend-HB-CUSP05 - Service & Interim Heat Pump Work Record

84
 SERVICE & INTERIM HEAT PUMP WORK RECORD
It is essential for reliability and eiciency that your heat Hybrid heat pump and heating system are regularly serviced and maintained in line with our manufacturer's
instructions and that the appropriate service / interim work record is completed below.
Service provider
When completing a service record (as below), please ensure you have carried out the service as described in the manufacturers’ instructions. Always use the Intergas
specified spare parts.
SERVICE / INTERIM WORK ON HEAT PUMP
delete as
appropriate
Date:
Company name:Engineer name:
Telephone N
o
: F-Gas/ REFCOM reg N :
Indoor unit checks
System pressure correct
NTC sensors connected / located correctly
System inhibitor concentration has been checked and appropriate action
taken in accordance with BS 7593 and the magnetic filter cleaned correctly*.
Yes
Comments:
Signature:
instructions and BS 7593. The system filter must be cleaned as per the filter manufacturers instructions.
Outdoor unit checks
*A system inhibitor eicacy test is required at every annual service in accordance with our manufacturers
Yes
Yes
bar
Yes
Debris from around unit cleaned (leaves and dirt etc).
Fan blades and grill cleaned (check for noise).
Evaporator fins cleaned with water (do not touch).
Yes
Yes
Yes
Any parts fitted / replaced:
o
SERVICE / INTERIM WORK ON HEAT PUMP
delete as
appropriate
Date:
Company name:Engineer name:
Telephone N
o
: F-Gas/ REFCOM reg N :
Indoor unit checks
System pressure correct
NTC sensors connected / located correctly
System inhibitor concentration has been checked and appropriate action
taken in accordance with BS 7593 and the magnetic filter cleaned correctly*.
Yes
Comments:
Signature:
instructions and BS 7593. The system filter must be cleaned as per the filter manufacturers instructions.
Outdoor unit checks
*A system inhibitor eicacy test is required at every annual service in accordance with our manufacturers
Yes
Yes
bar
Yes
Debris from around unit cleaned (leaves and dirt etc).
Fan blades and grill cleaned (check for noise).
Evaporator fins cleaned with water (do not touch).
Yes
Yes
Yes
Any parts fitted / replaced:
o
SERVICE / INTERIM WORK ON HEAT PUMP
delete as
appropriate
Date:
Company name:Engineer name:
Telephone N
o
: F-Gas/ REFCOM reg N :
Indoor unit checks
System pressure correct
NTC sensors connected / located correctly
System inhibitor concentration has been checked and appropriate action
taken in accordance with BS 7593 and the magnetic filter cleaned correctly*.
Yes
Comments:
Signature:
instructions and BS 7593. The system filter must be cleaned as per the filter manufacturers instructions.
Outdoor unit checks
*A system inhibitor eicacy test is required at every annual service in accordance with our manufacturers
Yes
Yes
bar
Yes
Debris from around unit cleaned (leaves and dirt etc).
Fan blades and grill cleaned (check for noise).
Evaporator fins cleaned with water (do not touch).
Yes
Yes
Yes
Any parts fitted / replaced:
o
SERVICE / INTERIM WORK ON HEAT PUMP
delete as
appropriate
Date:
Company name:Engineer name:
Telephone N
o
: F-Gas/ REFCOM reg N :
Indoor unit checks
System pressure correct
NTC sensors connected / located correctly
System inhibitor concentration has been checked and appropriate action
taken in accordance with BS 7593 and the magnetic filter cleaned correctly*.
Yes
Comments:
Signature:
instructions and BS 7593. The system filter must be cleaned as per the filter manufacturers instructions.
Outdoor unit checks
*A system inhibitor eicacy test is required at every annual service in accordance with our manufacturers
Yes
Yes
bar
Yes
Debris from around unit cleaned (leaves and dirt etc).
Fan blades and grill cleaned (check for noise).
Evaporator fins cleaned with water (do not touch).
Yes
Yes
Yes
Any parts fitted / replaced:
o
SERVICE / INTERIM WORK ON HEAT PUMP
delete as
appropriate
Date:
Company name:Engineer name:
Telephone N
o
: F-Gas/ REFCOM reg N :
Indoor unit checks
System pressure correct
NTC sensors connected / located correctly
System inhibitor concentration has been checked and appropriate action
taken in accordance with BS 7593 and the magnetic filter cleaned correctly*.
Yes
Comments:
Signature:
instructions and BS 7593. The system filter must be cleaned as per the filter manufacturers instructions.
Outdoor unit checks
*A system inhibitor eicacy test is required at every annual service in accordance with our manufacturers
Yes
Yes
bar
Yes
Debris from around unit cleaned (leaves and dirt etc).
Fan blades and grill cleaned (check for noise).
Evaporator fins cleaned with water (do not touch).
Yes
Yes
Yes
Any parts fitted / replaced:
o
SERVICE / INTERIM WORK ON HEAT PUMP
delete as
appropriate
Date:
Company name:Engineer name:
Telephone N
o
: F-Gas/ REFCOM reg N :
Indoor unit checks
System pressure correct
NTC sensors connected / located correctly
System inhibitor concentration has been checked and appropriate action
taken in accordance with BS 7593 and the magnetic filter cleaned correctly*.
Yes
Comments:
Signature:
instructions and BS 7593. The system filter must be cleaned as per the filter manufacturers instructions.
Outdoor unit checks
*A system inhibitor eicacy test is required at every annual service in accordance with our manufacturers
Yes
Yes
bar
Yes
Debris from around unit cleaned (leaves and dirt etc).
Fan blades and grill cleaned (check for noise).
Evaporator fins cleaned with water (do not touch).
Yes
Yes
Yes
Any parts fitted / replaced:
o