Chapter 4: Web configuration
98 NS3552-8P-2S-V2 User Manual
Mirror port configuration
The page includes the following fields:
Object Description
Port to mirror on Port to mirror is also known as the mirror port. Frames from ports that
have either source (rx) or destination (tx) mirroring enabled are
mirrored on this port. Disabled disables mirroring.
Port The logical port for the settings contained in the same row,
indicates that all ports are selected.
Mode Select mirror mode.
Note: For a given port, a frame is only transmitted once. It is therefore not possible to
mirror Tx frames on the mirror port. Because of this, the mode for the selected mirror
port is limited to Disabled or Rx only.
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
Link aggregation
Port Aggregation optimizes port usage by linking a group of ports together to form a
single Link Aggregated Group (LAG). Port aggregation multiplies the bandwidth
between the devices, increases port flexibility, and provides link redundancy.
To Next Page
Loading...
