Interlogix NS3552-8P-2S-V2 User Manual

NS3552-8P-2S-V2 User Manual 321
Chapter 6
Command line mode
The CLI groups all the commands in appropriate modes according to the nature of the
command. A sample of the CLI command modes are described below. Each of the
command modes support specific software commands.
Command Groups:
System System settings and reset options
IP IP configuration and Ping
Port Port management
MAC MAC address table
VLAN Virtual LAN
PVLAN Private VLAN
Security Security management
STP Spanning Tree Protocol
Aggr Link Aggregation
LACP Link Aggregation Control Protocol
LLDP Link Layer Discovery Protocol
LLDPMED Link Layer Discovery Protocol Media
Thermal Thermal Protection
PoE Power Over Ethernet
EVC Ethernet Virtual Connections
EPS Ethernet Protection Switching
MEP Maintainence entity End Point
QoS Quality of Service
Mirror Port mirroring
Config Load/Save of configuration via TFTP
Firmware Download of firmware via TFTP
UPnP Universal Plug and Play
MVR Multicast VLAN Registration
Voice VLAN Specific VLAN for voice traffic

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English