Interlogix NS3552-8P-2S-V2 - Mirror Command

Chapter 6: Command line mode
446 NS3552-8P-2S-V2 User Manual
QoS QCL Refresh
Description:
Resolve QCE conflict status. Same H/W resource is shared by multiple
applications and it may not be available even before MAX QCE entry. So user can
release the resource in use by other applications and use this command to acquire
the resource.
Syntax:
QoS QCL refresh
Parameters:
combined|static|voice_vlan|conflicts: combined : Shows the combined
status
static : Shows the static user configured status
voice_vlan : Shows the status by Voice VLAN
conflicts : Shows all conflict status
(default : Shows the combined status)
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
NS3552
-8P-2S-V2:/>
QoS Storm multicast enable 2
Mirror Command
Mirror Configuration
Description:
Show mirror configuration.
Syntax:
Mirror Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show mirror configuration.
NS3552
-8P-2S-V2:/>
mirror configuration
Mirror Port
Description:
Set or show the mirror port.
Syntax:
Mirror Port [<port>|disable]
Parameters:
<port>|disable: Mirror port or 'disable', default: Show port
Default Setting:
disable
Example:
Set port 2 for the mirror port.