Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
350 NS3552-8P-2S-V2 User Manual
PVLAN Isolate [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port isolation
disable : Disable port isolation
(default: Show port isolation port list)
Default Setting:
disable
Example:
Enable isolate for port10
NS3552
-8P-2S-V2:/>pvlan isolate 10 enable
Security Command
Security Switch User Configuration
Description:
Show users configuration.
Syntax:
Security Switch Users Configuration
Default Setting:
User Name Privilege
admin 15
Example:
Show users configuration
NS3552
-8P-2S-V2:/>
security
switch user configuration
Users Configuration:
====================
User Name Privilege Level
--------------------------------
----------------
admin 15
Security Switch User Add
Description:
Add or modify users entry.
Syntax:
Security Switch Users Add <user_name> <password> <privilege_level>
Parameters:
<user_name> : A string identifying the user name that this entry should belong
to. The allowed string length is (1-32). The valid user name is a
combination of letters, numbers, and underscores
<password> : The password for this user name. The allowed string length is
(0-32). Use 'clear' or "" as null string
<privilege_level>: User privilege level (1-15)

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English