Interlogix NS3552-8P-2S-V2 - SMTP Command

Chapter 6: Command line mode
476 NS3552-8P-2S-V2 User Manual
VCL IP Subnet-based Vlan Delete
Description:
Delete VCL IP Subnet-based VLAN entry.
Syntax:
VCL IPVlan Delete <vce_id>
Parameters:
<vce_id>: Unique VCE ID (1-128) for each VCL entry
SMTP Command
SMTP Configuration
Description:
Show SMTP configure.
Syntax:
SMTP Configuration
Default Setting:
disable
SMTP Mode
Description:
Enable or disable SMTP configure.
Syntax:
SMTP Mode [enable|disable]
Parameters:
enable : Enable SMTP mode
disable : Disable SMTP mode
(default: Show SMTP mode)
Default Setting:
Disable
SMTP Server
Description:
Set or show SMTP server configure.
Syntax:
SMTP Server [<server>] [<port>]
Parameters:
<server>: SMTP server address
<port> : SMTP server port
Default Setting:
disable
SMTP Auth
Description:
Enable or disable SMTP authentication configure.