Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 433
Quality of Service Command
QoS Configuration
Description:
Show QoS Configuration.
Syntax:
QoS Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
QoS Port Classification Class
Description:
Set or show the default QoS class.
Syntax:
QoS Port Classification Class [<port_list>] [<class>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<class> : QoS class (0-7)
Default Setting:
0
Example:
Set default QoS class in 1 for port 1
NS3552
-8P-2S-V2:/>
qos Port Classification Class 1 1
QoS Port Classification DPL
Description:
Set or show the default Drop Precedence Level.
Syntax:
QoS Port Classification DPL [<port_list>] [<dpl>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<dpl> : Drop Precedence Level (0-1)
Default Setting:
0
Example:
Set the default Drop Precedence Level in 1 for port1
NS3552
-8P-2S-V2:/>
qos Port Classification dpl 1 1
QoS Port Classification PCP
Description:
Set or show the default PCP for an untagged frame.
Syntax:
QoS Port Classification PCP [<port_list>] [<pcp>]
Parameters:
<port_list>: Port list or 'all', default: All ports

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English