Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
458 NS3552-8P-2S-V2 User Manual
Syntax:
Voice VLAN Discovery Protocol [<port_list>] [oui|lldp|both]
Parameters:
<port_list>: Port list or 'all', default: All ports
OUI : Detect telephony device by OUI address.
LLDP : Detect telephony device by LLDP.
Both : Both OUI and LLDP.
(default: Show Voice VLAN discovery protocol)
Default Setting:
OUI
Ethernet Ring Protection Switching Command
ERPS Command
Description:
Invoking an administrative command for a given protection group
[fs|ms|clear] : setting or clearing an administrative command for a given group
<port> : forced a block on the ring port where this command is issued
<group_id> : protection group id
Syntax:
Erps command [fs|ms|clear] <port> <group-id>
Parameters:
fs|ms|clear: administrative commands
<port> : Port number
<group-id> : protection group id 1 - 64
ERPS Version
Description:
Specifying protocol version for a given protection group
[v1|v2] : specifying protocol version for a given protection group
<group_id> : protection group id
Syntax:
Erps version [v1|v2] <group-id>
Parameters:
v1|v2 : ERPS protocol version to be supported
<group-id>: protection group id 1 - 64
ERPS Add
Description:
create a new ethernet ring protection group
<group-id> : protection group id
<east_port> : protection group Port 0
<west_port> : protection group Port 1, Port 1 can be 0 for sub-rings
[major|sub] : ring type i.e major-ring or sub-ring
[interconnected] : interconnection node or not
[[virtual_channel] : Virtual channel present or not

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English