Interlogix NS3552-8P-2S-V2 User Manual

Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 67
The page includes the following fields:
Object Description
Image The flash index name of the firmware image. The name of primary
(preferred) image is image, the alternate image is named image.bk.
Version The version of the firmware image.
Date The date when the firmware was produced.
Buttons
• Click Activate Alternate Image to use the alternate image. This button may be
disabled depending on the system state.
After clicking Activate Alternate Image, click OK to restart the system and use the
alternate image.
System reboot
The Restart Device page permits the device to be rebooted from a remote location.
After clicking the Yes button to restart, log in to the web interface about 60 seconds
later.
Buttons
• Click Yes to reboot the system.
• Click No to return to the main web page without rebooting the system.
DHCP server
Mode
The DHCP Server Mode Configuration page permits setting changes for Global Mode
and VLAN Mode.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English