Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
410 NS3552-8P-2S-V2 User Manual
Parameters:
<port_list>: Port list or 'all', default: All ports
fast : Fast PDU transmissions (fast timeout)
slow : Slow PDU transmissions (slow timeout)
(default: Show LACP timeout)
Default Setting:
fast
LLDP Command
LLDP Configuration
Description:
Show LLDP configuration.
Syntax:
LLDP Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show LLDP configuration of port1~4
NS3552
-8P-2S-V2:/>
lldp configuration 1-4
LLDP Configuration:
===================
Interval : 30
Hold : 3
Tx Delay : 2
Reinit Delay: 2
Port Mode Port
Descr System Name System Descr System Capa Mgmt
Addr CDP awareness
----
-------- ---------- ----------- ------------ ----------- --------- -----------
--
1 Enabled Enabled Enabled Enabled Enabled Enabled
Dis
abled
2 Enabled Enabled Enabled Enabled Enabled Enabled
Disabled
3 Enabled Enabled Enabled Enabled Enabled Enabled
Disabled
4 Enabled Enabled Enabled Enabled Enabled Enabled
Disabled
LLDP Mode
Description:
Set or show LLDP mode.
Syntax:

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English