Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 409
Example:
Set passive for port1~4
NS3552
-8P-2S-V2:/>
lacp role 1-4 passive
LACP Status
Description:
Show LACP Status.
Syntax:
LACP Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show LACP status of port1~4
NS3552
-8P-2S-V2:/>
lacp status 1-4
Port Mode Key Aggr ID Partner System ID Partner Port
----
-------- ----- ------- ----------------- ------------
1 Disabled 1
- - -
2 Disabled 1
- - -
3 Disabled 1
- - -
4 Disabled 1 - - -
LACP Statistics
Description:
Show LACP Statistics.
Syntax:
LACP Statistics [<port_list>] [clear]
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear LACP statistics
Example:
Show LACP statistics of port1~4
NS3552
-8P-2S-V2:/>
lacp statistics 1-4
Port Rx Frames Tx Frames Rx Unknown Rx Illegal
------
--------------- --------------- --------------- ----------
1 0 0 0 0
2 0 0 0 0
3 0 0
0 0
4 0 0 0 0
LACP Timeout
Description:
Set or show the LACP timeout.
Syntax:
LACP Timeout [<port_list>] [fast|slow]

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English